Help
Create and print a target
Choose your target, download the PDF, and print it at the correct size. Printing the webpage itself is not supported.
Choose your target
Use Customise to choose a practice target sheet or zeroing sheet, then select the paper size, orientation, and layout you need. For a zeroing sheet, also select the target distance and the click value marked on your scope.
Using a zeroing sheet
Each grid interval represents one click on your scope turrets at the distance and click value you selected. Count the horizontal and vertical intervals between your point of aim and the centre of your group to see the offset in clicks. Check your scope’s markings and instructions before making any adjustment.
Zeroing sheets include horizontal and vertical 5 cm / 2 inch references because their grid must print at the correct physical scale. Measure both references before using the sheet. If either measurement is wrong, check the selected paper size and print scaling, then print again.
Download and print
- Choose Download PDF and open the downloaded file.
- Select the same paper size and orientation shown in the generator.
- Use Actual size or 100%. Turn off Fit, Shrink, and borderless expansion.
On iPhone, open the downloaded PDF and use Share → Print.
Use a short code
Enter the ten-symbol code printed on a target to load its settings. Hyphens and letter case do not matter. Check the preview before use.
If the preview fails
Check any highlighted setting and choose Retry preview. If the service is busy, wait briefly and try again.